> 產品介紹 > Switching Adapter > Desk Top 桌上型電源
產品介紹
12W Cord IN Cord OUT Type
12V DC 1.0A 12W 定電壓 線入線出式
This document describes basic electrical characteristics and mechanical characteristic of 12W class II power adapter
Product characteristics
General Description
Model 6A-151DT12A is an universal switching-mode power supply, operating at Input
voltage 90VAC to 264VAC
and output voltage of 12VDC with 1.0A DC load
Electric Characteristics
Electric Characteristics
Input
No ITEM SPECIFICATION
1. Rated Input Voltage AC100V-240V
Vibration Input Voltage Range AC90V-264V
2. Frequency Rated 50-60Hz
Frequency Vibration 47-63Hz
3. Input Current Rated 500mA RMS Max
Inrush Current
NO Damage
4. Hold Up Time ≧10ms (at 100V ac Full Load)
5. Turn On Delay Time ≦3 Seconds (at 115V ac Full Load)
6. Leakage Current < 0.25mA
7. Average Efficiency
82.96% Min (CEC & DOE LEVEL VI Compliant) 82.96% Min (ErP Compliant)
83.26% Min (EC COC Tier2 Compliant)
8. Input Power(no load) <0.1W (CEC & DOE LEVEL VI Compliant)
<0.1W (ErP Compliant)
<0.075W (EC COC Tier2 Compliant)
Output:
No ITEM SPECIFICATION
1. Output Voltage 12VDC
2. Output max. Current 1.0A
3. Output min. Current 0A
4. Load Regulation ± 5%
5. Over Voltage Protection NO Damage
6. Over Load Protection NO Damage
7. Short circuit protection Output shut down and auto- recover
8. Ripple Voltage
150mV (p-p) (1) INPUT:100V~240V AC OUTPUT:FULL LOAD
Measuring is done by 20MHz bandwidth oscilloscope and terminated each output with a 10uF aluminum electrolytic capacitor and 0.1uF cetamic capacitor.
HI-POT SPECIFICATION
I/P-O/P : 3000Vac OR 4242VDC, 10mA 60Sec. (between primary side and secondary side.)
Insulation resistance:
Input to output: 500Vdc to test the input to output resistance not be less 100M Ohm
Safety (approved) (62368) : CB,LVD，CE Safety (approved) (60950) : CE
EMI (Meet):FCC PART15B , EN55032 class B ,VCCI –class B
Environmental standard: RoHS compliant
Mechanical characteristics:
AC cord： See Reference Att.5
DC cord:
Bending test: Life 1000 times 100% guarantee.
Swings 120 from left to right loading weight 200g , 40 cycle/minute.
Pull test : DC cord and plug ,weight 6kg for 1 minute.
Cord length and output plug: See Reference Att.4
Weight : g
Case Size: (L)93.7X (W)47 X (H)26mm
Environmental Specifications:
Normal operating temperature and humidity
Temperature
Operating: 0℃ to 40℃ Storage : -10℃ to 70℃
Humidity
Operating : 20% to 80%
Storage: 10% to 90%
